Many homeowners who opt to install window blinds on their home faces some common problem over the years. Fortunately, these common problems of window blinds have already been recognised, and many have already found an easy solution on how to fix them. 

So, if you plan to install blinds on your windows, you should expect that you, too, will encounter some problems like other blind owners. And with the aim of helping you fix these problems, we have compiled a list of common issues you can encounter when using blinds and how to fix them.

Roller Blinds That Won’t Go Down

Blinds being stuck in one spot and refusing to come down is one of the most prevalent difficulties that homeowners experience. 

To correct it, follow the actions outlined below.

1. Remove the blind from its mounting bracket.
2. At the end of the headrail, you’ll find a pin that may be rotated. Turn the pin with pliers until it stops moving. The strain on the blind would be relieved.
3. Replace the blind in the brackets.
4. Check that the blind is working properly by pulling it up and down a few times.

Roller blinds that don’t stay put.

Another issue you may find is blinds that do not stay in place. The problem could be with the ratchet that holds the blind in place. Check out the steps below to solve it.

1. Remove the blind from its brackets.
2. Roll it up completely.
3. The rachet should now be visible.
4. The main factor that prevents a rachet from working properly is dust. Scrape off any dust or threads that have accumulated on the ratchet mechanism with a toothpick.
5. After cleaning, apply a lubricant to the rachet to make it work more smoothly.
6. Reinstall the blind, and everything should be fine.

Roller Shades Move Too Slowly

The difficulty with blinds that operate too slowly or too quickly is the way the fabric rolls around the rolling tube. The fabric is clogged with tubes if your blind moves too slowly. With a few simple steps, you can solve the problem.

1. Lower the blinds all the way down.
2. Take it out of the brackets.
3. Roll halfway up by hand.
4. Replace the blind, and everything should be OK.

Roller Blinds Are Moving Too Fast

Simply reverse the procedures if your blinds are moving too quickly.

1. Close the blinds completely.
2. Take it out of the brackets.
3. Manually roll it down to the halfway point once again.
4. Replace the blind, and everything should be OK

Slats Have Been Broken

If your window slats are broken and need to be repaired, all you have to do is replace them. 

1. Remove the ladder cab from the rail and pull out the cords a little bit to replace them.
2. The broken slats must then be replaced with new ones.
3. Finally, slide the codes back inside the bottom rail and tie the knots. 
4. Your window blinds will then begin to function again.

Read the instructions provided by your manufacturer before attempting any of the steps listed above. There could be a lot of important information there. Please keep in mind that the instructions above may not apply to your specific blind brand or model.

With these simple methods, you can get your blinds up and running without having to replace them, which is both cost-effective and environmentally friendly.

Are Blinds Still Good For Windows?

Despite all the problems in using blinds, the benefits still outweigh the drawbacks. Blinds make a home more convenient and comfortable. The proper blinds can help with light management, privacy, and sleep. 

They can also reduce energy use by putting insulation in front of a drafty window. Therefore, blinds are still an excellent choice in covering your windows from the outside world and from the prying eyes of passers by. 

Final Words

Most of the problems you will encounter in using window blinds can be easily fixed. You can use this article as a guide in dealing with the abovementioned problems and fix them accordingly. However, if the problem you are facing isn’t in the list mentioned, it is best to read the blind manufacturer instruction, do your research or call a professional, especially if the problem is related to the installation.