Window blinds are the most common and the most popular type of window covering in Australia. However, just like with any other window coverings, window blinds also experienced some issues over time. 

If you own or plan to get window blinds for your home, you might want to check these common issues you can experience with window blinds and how to fix them. 

Issue 1: The Blinds Does Not Lower Down 

The most common issues window blinds owner is their blinds can not be lowered down. To fix this, you must ensure first that the lift cords are even against the headrail. Once you are sure that it is even, pull the cord to release the cord lock. 

If after doing it the blinds still can not be lowered down, check and locate the pin inside the lock mechanism. Use a butter knife and slowly push the pin to release the slats. After doing this, there will be no more problem in lowering down your blinds

Issue 2: The Slats Won’t Tilt

A blind is an excellent covering that provides privacy. However, if the slats won’t tilt, it is another story. If this happens check out the tilt rod first and if you can twist it try to locate the metal rod in the headrail. 

Remove the blinds from the window for you to have easy access to the headrail and locate the metal rod. Once you found the metal rod, you will need to find the tilt mechanism housing and push the tilt rod into the tilt mechanism. It will make your tilt mechanism start to work again. 

Issue 3: A Broken Slats 

If you are worried about your broken slats, worry no more. Blind slats are replaceable what you will need to do is to follow these steps below on how you can replace the broken slats on your window blinds. 

• Buy a compatible slat
• Remove the cap. You will locate it on the bottom rail. 
• When you see the exposed cords, try to pull them out slowly.
• Cut the cords. Make sure to cut it above the knot. 
• Pull the cords up to the damaged slat. 
• Remove and replace the broken slat. 
• Fix the new slat and make sure it is properly aligned with the old ones. 
• Weave the cord back through the alternating holes of the ladder rungs. 
• Place back the cord into the bottom rail and retie the knot you cut earlier. 

Issue 4: The Wand Tilter Needs to Be Replaced

The wand tilter is the rod you use to tilt your slats. If this becomes damaged, you can never tilt your slats even after you have fixed it following the steps provided earlier. Here are the steps that will guide you through when replacing the wand tilter on your window blinds. 

• Purchase a wand tilter replacement.
• Remove the blinds from the window. 
• Remove the wand, the metal brace, or the plastic cap of the headrail.
• Detach the tilt rod from the want tilter. 
• Replace the tilter and put it back into place. 
• Align the flat parts of the tilter and the rod lines by turning the tilter shaft. 
• Push the rod back to the tilter before you place the brace or cap back. 
• Your wand tilter is now new and working.

Why People Loves Window Blinds

 

Besides the fact that window blinds provide you with a lot of option, it is also pleasing to the eyes. In addition to that, even though this type of window covering is not perfect and still experiences some issues, you can be assured that it is only minor. 

As you can see, there are only four common issues a window blind can encounter in its lifespan and the fix for each issue are fairly straightforward. 

A window blind might look complicated and can intimidate you, it is very easy to maintain and fix even if you are not the handyman type.

But always remember, with proper maintenance and care any type of window coverings including a window blind will last long without experiencing any issues. As a result, you will also not need to perform some fixes which save you time and money. 

Do not get intimidated by window blinds. Experience its benefits now by purchasing the best window blinds for you. Check out products and call us now! We would be more than happy to answer your inquiries. 

Figure Out the Issue and Fix It 

Now that you are familiar with the common issues a window blind might encounter, start conducting an expectation and see if your blinds are having one or more issues mentioned in this article. If you notice an issue, start fixing it to avoid the problem getting bigger by following the steps provided according to what kind of issue you are having.